Search

SCRAPS BY P & A DEZIGNS . Powered by Blogger.

Contributors

Followers

Thursday 30 April 2015
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU The Messanger

This tutorial was written by me on April 30, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Jennifer Janesko
You can find this tube at Creative Design Outlet   HERE
I bought this tube tube at CILM but they are no longer in business.
Do not use this tube unless you have a license.
Scrap Kit: Scrap kit Ellie Mae by Devilish Dezines
You can find this kit at Scraps N Company  HERE
Mask: WSL 3 HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 1.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 1 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.  
Duplicate and merge down.
(see tag for placement) 
 
This will be the frame layer:   
  Frame 4C/P and re-size 50%.  Move it up just a little bit on tag.  Make sure frame 4 layer is still highlightedGrab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 10 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 4.
If you are using the same tube as me, grab it now.  C/P over frame and then move her into position.  Duplicate and move the copy under frame but over paper layer.  SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT - SELECTIONS - SELECT NONE.
Grab your magic wand tool and click in the middle of frame.   
SELECTIONS - INVERT, grab the eraser tool now.  Erase the parts of the original tube you don't want.  SELECTIONS - SELECT NONE.
(see tag for placement)
 
Now onto some elements: 
Element 2 - C/P and move to bottom middle of tag.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Element 6 - C/P and leave it where it lands.  Make sure this layer is also UNDER the frame layer(s).
(see tag for placement)
Element 22 - C/P and re-size 75%.  Move to upper left corner of tag.  Make sure this layer is also UNDER the frame layer(s).  Duplicate and mirror, then move down just a little on tag. 
(see tag for placement)
Element 39 - C/P and re-size 50%.  Move to upper right side of tag.  Make sure this layer is also UNDER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Element 47 - C/P and re-size 50%.  Move to bottom of frame.  You can move this layer under the original tube layer.  Make sure this layer, and all other layer(s), are OVER the frame layer(s).
(see tag for placement)
 Element 12 - C/P and re-size 50%.  Flip and move to top of frame.  Make sure this is also under the original tube layer.
(see tag for placement) 
Element 36 - C/P and re-size 30%.  Move to bottom right corner of frame.  Duplicate and mirror.
(see tag for placement)
Element 31 - C/P and re-size 25%.  Move to middle right side of frame.  Duplicate and mirror.
(see tag for placement)
Element 7 - C/P and re-size 25%.  Move to bottom left corner of frame over element 36.  Duplicate and mirror.
(see tag for placement)
Element 40 - C/P and re-size 25%.  Move to bottom left side of tag.
(see tag for placement)
Element 37 - C/P and re-size 30%.  Move to bottom left side of tag over element 40.
(see tag for placement)
 Element 23 - C/P and re-size 50%.  Move to bottom right side of tag.
(see tag for placement)
Element 13 - C/P and re-size 15%.  Move to bottom right side of tag on the left side of element 23.
(see tag for placement)
Element 15 - C/P and re-size 15%.  Move to bottom right side of tag on the right side of element 23.
(see tag for placement)
Element 14 - C/P and re-size 15%.  Move to bottom right side of tag in front of element 23.
(see tag for placement)
Element 50 - C/P and re-size 20%.  Move to bottom middle of tag.
(see tag for placement)
Frame 2 - C/P and re-size 25%.  Move to bottom middle of tag over element 50.
(see tag for placement)

Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   


Saturday 25 April 2015
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Bonnie

This tutorial was written by me on April 25, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Ellie Milk
I bought this tube and Pics For Design  HERE
 This tube was gifted to me and 
can be found in the Exclusive Membership area.
Do not use this tube unless you have a license.
Scrap Kit: Summer Lovin' by Scrappin With Lil Ole Me
You can buy this kit at Scrapping Your Memories  HERE
MaskWSL 3 & 84  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 18.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 18 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.
Duplicate and merge down.
NEW RASTER LAYER - Open paper 10.  Open next mask (WSL 84) and minimize.
SELECTIONS - SELECT ALL - Copy and paste Paper 10 into selection.
Go to LAYERS - NEW MASK LAYER - FROM IMAGE - SOURCE LUMINANCE CHECKED - from menu, find WSL 84 - OK.
Duplicate, merge down then re-size 115%.

(see tag for placement) 
 
There is no frame layer:
Now onto some elements: 
Element 67 - C/P and re-size 50%.  Move to upper middle of tag.
(see tag for placement)
Element 174 - C/P and move to bottom right corner of tag.
(see tag for placement)
Element 126 - C/P and move to bottom middle of tag.
(see tag for placement)
Element 171 - C/P and re-size 75%.  Move to bottom left corner of tag.  Duplicate and mirror.
(see tag for placement)
Element 184 - C/P and re-size 50%.  Leave it in the middle of tag.
(see tag for placement) 
Element 64 - C/P and re-size 50%.  Move to upper left corner of tag.  Duplicate and mirror.
(see tag for placement)
  Element 3 - C/P and re-size 75%.  Move to bottom left corner of tag.  Duplicate and mirror.
(see tag for placement)
Element 71 - C/P and re-size 50%.  Move to bottom middle of tag.
(see tag for placement)
Element 5 - C/P and re-size 50%.  Move to bottom right corner of tag.
(see tag for placement)
Element 14 - C/P and re-size 25%.  Move to bottom right corner of tag over element 5.
(see tag for placement)
Element 37 - C/P and re-size 75%.  Move to bottom left corner of tag.  I changed the color of this element by adjusting the Hue/Saturation/Lightness which can be found on the ADJUST drop down menu.  I used the following setting to match the color of the tube I am using.
 
  
(see tag for placement)
 
I placed the tube layer(s) here: 
If you are using the same one as me, grab your chosen version now.  C/P re-size 25%.  Move to bottom middle of tag.
(see tag for placement) 
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   


Friday 24 April 2015
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Lick It Up

This tutorial was written by me on April 24, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: PinUp Toons
You can find this tube at Creative Design Outlet   HERE 
Do not use this tube unless you have a license.
Scrap Kit: ScrapRD_50Shades-mini by Rebel Dezigns
You can find this kit at Creative Design Outlet  HERE
Mask: WSL 3  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 3.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.  
Duplicate and merge down.
(see tag for placement)  
 
This will be the frame layer:   
Frame 2C/P and move up and a leave it where it lands.  Make sure Frame 2 layer is still highlightedGrab the lasso tool.  I used it freehand and just went around parts of the frame I wanted to have a paper background on. 
NEW RASTER LAYER - C/Paste into selection Paper 5.
SELECTION - SELECT NONE.  Now grab the tube you are using.
If you are using the same one as me, grab it now.
  C/P and move her into position on the left side of the frame.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on SOFT LIGHT.
(see tag for placement)
 
Now onto some elements: 
Element 4 - C/P and duplicate.  Move copy so it matches original.  This should go from left to right across the tag.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Element 8 - C/P and move to top left side of tag.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Element 30 - C/P and move to top right side of tag.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Element 27 - C/P and re-size 60%.  Free Rotate 30ยบ right.  Move to top right side of frame over knot.  Make sure this layer, and all other layer(s), are OVER the frame layer(s).
(see tag for placement)
Element 9 - C/P and move to bottom left side of tag over bottom of frame.  
(see tag for placement) 
Element 14 - C/P and move to bottom left side of tag over element 9.
(see tag for placement)
Element 12 - C/P and move to left side of tag in front of element 9 and 14.
(see tag for placement)
  Element 5 - C/P and move to bottom left side of tag over element 14 but to the right of element 12.
(see tag for placement) 
Element 11 - C/P and re-size 40%.  Move to bottom left side of tag in front of elements 5, 12, 14 and 9.
(see tag for placement)
Element 6 - C/P and re-size 50%.  Move to bottom left side of tag over element 5, 12, 14, 5 and 11.  Free rotate 30ยบ left.
(see tag for placement)
Element 25 - C/P and re-size 30%.  Move to bottom middle of tag.
(see tag for placement)
Element 19 - C/P and re-size 40%.  Move to bottom middle of tag in front of element 25.
(see tag for placement)
Element 28 - C/P and re-size 20%.  Move to bottom middle of tag in front of element 25.
(see tag for placement)
Element 1 - C/P and re-size 25%.  Move to bottom middle of tag in front of element 25, but to the right of element 19.
(see tag for placement)
Element 22 - C/P and re-size 30%.  Move to bottom middle of tag in front of element 19, 28 and 1.
(see tag for placement)
Element 2 - C/P and re-size 25%.  Move to bottom middle of tag in front of elements 25, 19, 28, 1 and 22.
(see tag for placement)
WordArt - C/P and move to top middle of tag.
(see tag for placement)

I placed the tube layer(s) here: 
If your gonna use the same tube as I did, C/P and mirror.  Move her down to bottom right corner of tag over all other layers.
(see tag for placement) 
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   
Thursday 23 April 2015
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Hot Toddy

This tutorial was written by me on April 23, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Lightartist_XXX
You can find this tube at Pics For Design   HERE 
Do not use this tube unless you have a license.
Scrap Kit: Hot Toddy by Designs By Stina
You can find this kit at Designer Scraps  HERE
Mask: WSL 84  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 12.  Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 12 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  
Duplicate and merge down.  Re-size 115%.
(see tag for placement)  
 
This will be the frame layer:   
Frame 4C/P and move up and a little to the left.  Make sure Frame 4 layer is still highlightedGrab your magic wand.  Click in the middle of frame.  
NEW RASTER LAYER - C/Paste into selection Paper 1.
SELECTION - SELECT NONE.  Now grab the tube you are using.
If you are using the same one as me, grab the close up now.
  C/P and move her into position on the right side of the frame.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on SCREEN.
(see tag for placement)
 
Now onto some elements: 
Flowers - C/P and re-size 75%.  Move to upper right side of tag.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Deco 2 - C/P and move to right side of frame.  Make sure this layer, and all other layer(s), are OVER the frame layer(s).
(see tag for placement)
Foliage 2 - C/P and re-size 60%.  Move to right side of frame over Deco 2 layer.
(see tag for placement)
Branch - C/P and move to bottom right side of frame. 
(see tag for placement) 
Foliage - C/P and move to bottom right side of frame over branch.
(see tag for placement)
Strawberries - C/P and re-size 40%.  Move to bottom right corner of frame over branch and foliage.
(see tag for placement)
  Books - C/P and re-size 75%.  Move to bottom left corner of frame.
(see tag for placement) 
Hearts - C/P and re-size 50%.  Mirror and move to bottom left side of tag.
(see tag for placement)
Old Book - C/P and re-size 25%.  Move to bottom right side of tag.
(see tag for placement)
Hot Toddy 2 - C/P and re-size 30%.  Move to top left corner of tag and place on top of books.
(see tag for placement)
Cupcake - C/P and re-size 20%.  Move to bottom middle of tag.
(see tag for placement)

I placed the tube layer(s) here: 
If your gonna use the same tube as I did, C/P your choice of the full version of the tube now.  Move her to the bottom left side of tag and make her look like she is sitting on the hearts cushions.
(see tag for placement) 
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   
Monday 20 April 2015
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU My Secret Garden

This tutorial was written by me on April 20, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Di_Halim
You can find this tube at Pics For Design  HERE
This is an exclusive tube and was gifted to me.
You will need to be a member of the Exclusive Club to buy it.
Do not use this tube unless you have a license.
Scrap Kit: My Secret Garden by Creative Crazy Scraps
You can find this kit at Creative Crazy Scraps Store  HERE
Mask: WSL 3 HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 4.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 18 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.  
Duplicate and merge down.
(see tag for placement) 
 
This will be the frame layer:   
Element 14C/P and move it up just a bit on tag.  Make sure element 14 layer is still highlightedGrab your magic wand.
Click in the middle of each panel of the frame.  
NEW RASTER LAYER - C/Paste into selection Paper 8.
SELECTION - SELECT NONE.  Now grab the tube you are using.
If you are using the same tube as me, grab it now.
Mirror then C/P and move her into far left panel of frame.
 C/P again but don't mirror.  Move to far right panel of frame.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Mere both tube layers down.  Duplicate this tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on OVERLAY.
Element 21 - C/P and re-size 40%.  Move into middle panel of frame.
(see tag for placement)
 
Now onto some elements: 
Element 12 - C/P and move it up to the right corner of tag.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Element 16 - C/P and move to top right corner of tag.  Make sure this layer is UNDER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Element 17 - C/P and move to upper right side of tag.  Make sure this layer is UNDER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Element 20 - C/P and move to bottom right side of tag.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement) 
Element 10 - C/P and move to top of frame.  Make sure this layer, and all other layer(s), are OVER the frame layer(s).  Duplicate and mirror.  Move to lower part of frame.
(see tag for placement)
Element 18 - C/P and re-size 50%.  Move to top right corner of frame.  Flip, then duplicate.  Mirror the copy and flip, then free rotate 25ยบ left.  Make sure the copy sits on the top left corner of frame.
(see tag for placement)
 Element 6 - C/P and move to bottom left corner of tag.
(see tag for placement) 
Element 25 - C/P and re-size 20%.  Move to right side of tag over right side of element 20.
(see tag for placement)
Element 22 - C/P and re-size 20%.  Move to bottom left corner and on the left side of element 6.
(see tag for placement)

I placed the tube layer(s) here: 
If your gonna use the same tube as I did, C/P your choice of the full version of the tube now.  Mirror and move her to the left side of tag and make her look like she is sitting on element 6.
(see tag for placement) 
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   

My TOU

All things I provide on this blog are my own creation.
Any resemblance to others is strictly coincidence.
Please do not share.
Do not claim as yours.
If you use any items here please link back to my blog.
No translations of my tutorials.
The tutorials here are merely guidelines and you are perfectly welcome to do your own thing.
All links were current and available at the time of their posting. I cannot control who comes and goes, so if you find a broken link, please use a suitable replacement item.
Feel free to send me anything that you make with my stuff and I will gladly showcase it. My email is merrittlise@gmail.com

Talk to Me