Friday 11 July 2014
This tutorial was written by me on July 11, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Jennifer Janesko
Please Don't use these tube(s) without a license.
Scrap Kit: ScrapFoxy_IB-JenniferJanesko-76-2
You can find this kit by Foxy Designz at the Creative Design Outlet HERE
Mask: MPM Mask 58 HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open Paper 3. Open mask (MPM Mask 58) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find MPM Mask 58 – OK. Duplicate and merge down. Re-size 105%.
This will be the frame layer:
Frame 1 – C/P and re-size 90%.
Frame 2 - C/P and re-size 90. Leave both in the middle of tag.
Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of frame 2.
SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - Make sure this layer is under all frame layers.
C/Paste into selection Paper 1. Keep selected.
Now grab the tube you are using. I used Jennifer Janesko 76-2. If you are using the same one(s) as me, grab it now.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on NORMAL.
(see tag for placement)
Some elements now:
Element 3 - C/P and move to upper left corner of tag. Make sure this layer is UNDER the frame layer(s). Duplicate and mirror, then flip.
(see tag for placement)
Element 4 - C/P and move to upper right corner of frame. Make sure this layer and all other layers are OVER the frame layer(s).
Duplicate and mirror, then flip.
(see tag for placement)
Element 8 - C/P and move to upper left side of frame. Duplicate and move to bottom right side of frame.
(see tag for placement)
Element 12 - C/P and re-size 50%. Move to bottom middle of frame.
(see tag for placement)
Element 16 - C/P and move to bottom left side of tag in front of element 12. Duplicate and mirror.
(see tag for placement)
Element 5 - C/P and re-size 30%. Move to lower right side of tag beside element 16.
(see tag for placement)
Element 11 - C/P and re-size 40%. Move to bottom right side of tag in front of but to the right side of element 5.
(see tag for placement)
Element 9 - C/P and re-size 30%. Move to bottom left side of tag.
(see tag for placement)
Element 2 - C/P and re-size 15%. Move to bottom left side of tag beside but to the left side of element 9.
(see tag for placement)
Element 1 - C/P and re-size 15%. Move to bottom left side of tag beside but to the right side of element 9.
(see tag for placement)
I place the tube layer(s) here:
Here I used a different Jennifer Janesko tube. I used tube 10-2 here. If you are using the same tube as me. C/P and move to bottom left side of tag in front of all layers.
(see tag for placement)
New Raster – 800 X 800.
Open Paper 3. Open mask (MPM Mask 58) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find MPM Mask 58 – OK. Duplicate and merge down. Re-size 105%.
This will be the frame layer:
Frame 1 – C/P and re-size 90%.
Frame 2 - C/P and re-size 90. Leave both in the middle of tag.
Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of frame 2.
SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - Make sure this layer is under all frame layers.
C/Paste into selection Paper 1. Keep selected.
Now grab the tube you are using. I used Jennifer Janesko 76-2. If you are using the same one(s) as me, grab it now.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on NORMAL.
(see tag for placement)
Some elements now:
Element 3 - C/P and move to upper left corner of tag. Make sure this layer is UNDER the frame layer(s). Duplicate and mirror, then flip.
(see tag for placement)
Element 4 - C/P and move to upper right corner of frame. Make sure this layer and all other layers are OVER the frame layer(s).
Duplicate and mirror, then flip.
(see tag for placement)
Element 8 - C/P and move to upper left side of frame. Duplicate and move to bottom right side of frame.
(see tag for placement)
Element 12 - C/P and re-size 50%. Move to bottom middle of frame.
(see tag for placement)
Element 16 - C/P and move to bottom left side of tag in front of element 12. Duplicate and mirror.
(see tag for placement)
Element 5 - C/P and re-size 30%. Move to lower right side of tag beside element 16.
(see tag for placement)
Element 11 - C/P and re-size 40%. Move to bottom right side of tag in front of but to the right side of element 5.
(see tag for placement)
Element 9 - C/P and re-size 30%. Move to bottom left side of tag.
(see tag for placement)
Element 2 - C/P and re-size 15%. Move to bottom left side of tag beside but to the left side of element 9.
(see tag for placement)
Element 1 - C/P and re-size 15%. Move to bottom left side of tag beside but to the right side of element 9.
(see tag for placement)
I place the tube layer(s) here:
Here I used a different Jennifer Janesko tube. I used tube 10-2 here. If you are using the same tube as me. C/P and move to bottom left side of tag in front of all layers.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Subscribe to:
Post Comments
(Atom)
0 comments:
Post a Comment