Monday 6 January 2014
This tutorial was written by me on January 6, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Jose Cano
You can find this tube at the Cano Tubes Store HERE
Please Don't use this tube without a license.
Scrap Kit: Honey Kit by Desirena Designs
You can find this Exclusive kit at the Cano Tube Store HERE
Mask: WSL 116 HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open P7. Open mask (WSL 116) and minimize.
SELECTIONS – SELECT ALL – Copy and paste P7 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 116 – OK. Duplicate and merge down.
This will be the frame layer:
Element 20 – C/P and leave frame where it lands. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of the frame.
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.
NEW RASTER LAYER - C/Paste into selection P1.
SELECTIONS - SELECT NONE.
(see tag for placements)
Some elements now:
Element 28 - C/P and move to bottom of tag. Duplicate and mirror then flip. Make sure this layer is under all frame layers.
(see tag for placement)
Element 15 - C/P and re-size 70%. Move to right middle side of tag. Duplicate and mirror. Make sure this layer is under all frame layers.
(see tag for placement)
Element 32 - C/P and move up a little on tag. Make sure this layer is under frame layer, but over P1 layer.
(see tag for placement)
Element 16 - C/P and move to top left corner of tag. Duplicate and mirror. Make sure this layer is top most layer.
(see tag for placement)
Element 24 - C/P and move to upper left side of frame. Duplicate and mirror. Make sure this is over element 16.
(see tag for placement)
Element 17 - C/P and re-size 50%. Move to bottom right corner of tag.
(see tag for placement)
Element 13 - C/P and re-size 30%. Move to bottom right side of tag. Duplicate and move copy a little to the left.
(see tag for placement)
Element 12 - C/P and re-size 20%. Move to bottom right side of tag beside element 13.
(see tag for placement)
Element 9 - C/P and re-size 30%. Move to bottom left corner of tag.
(see tag for placement)
Element 7 - C/P and re-size 30%. Move to bottom left side of tag.
(see tag for placement)
Element 25 - C/P and re-size 50%. Move to bottom left side of tag in front of element 7.
(see tag for placement)
Element 6 - C/P and re-size 50%. Flip this layer and move in front of glass of champagne. Make sure this is the top most layer.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab it now. C/P and re-size 60%. Move over frame layer. Move her down just a little. Make sure you grab the champagne glass too. Move this layer just under Element 6.
(see tag for placement)
New Raster – 800 X 800.
Open P7. Open mask (WSL 116) and minimize.
SELECTIONS – SELECT ALL – Copy and paste P7 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 116 – OK. Duplicate and merge down.
This will be the frame layer:
Element 20 – C/P and leave frame where it lands. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of the frame.
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.
NEW RASTER LAYER - C/Paste into selection P1.
SELECTIONS - SELECT NONE.
(see tag for placements)
Some elements now:
Element 28 - C/P and move to bottom of tag. Duplicate and mirror then flip. Make sure this layer is under all frame layers.
(see tag for placement)
Element 15 - C/P and re-size 70%. Move to right middle side of tag. Duplicate and mirror. Make sure this layer is under all frame layers.
(see tag for placement)
Element 32 - C/P and move up a little on tag. Make sure this layer is under frame layer, but over P1 layer.
(see tag for placement)
Element 16 - C/P and move to top left corner of tag. Duplicate and mirror. Make sure this layer is top most layer.
(see tag for placement)
Element 24 - C/P and move to upper left side of frame. Duplicate and mirror. Make sure this is over element 16.
(see tag for placement)
Element 17 - C/P and re-size 50%. Move to bottom right corner of tag.
(see tag for placement)
Element 13 - C/P and re-size 30%. Move to bottom right side of tag. Duplicate and move copy a little to the left.
(see tag for placement)
Element 12 - C/P and re-size 20%. Move to bottom right side of tag beside element 13.
(see tag for placement)
Element 9 - C/P and re-size 30%. Move to bottom left corner of tag.
(see tag for placement)
Element 7 - C/P and re-size 30%. Move to bottom left side of tag.
(see tag for placement)
Element 25 - C/P and re-size 50%. Move to bottom left side of tag in front of element 7.
(see tag for placement)
Element 6 - C/P and re-size 50%. Flip this layer and move in front of glass of champagne. Make sure this is the top most layer.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab it now. C/P and re-size 60%. Move over frame layer. Move her down just a little. Make sure you grab the champagne glass too. Move this layer just under Element 6.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Subscribe to:
Post Comments
(Atom)
0 comments:
Post a Comment