Thursday 29 August 2013
This tutorial was written by me on August 29, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Ismael Rac
You can find this tube at XeracX Store HERE
Please Don't use this tube without a license.
Scrap Kit: 2013 Miss Cane by MistyLynns Creations HERE
Mask: WSL 84 HERE
Font: Inked God Font HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open Paper 1. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 1 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 120%.
Let’s do the frame layer now:
New Raster – 800 X 800.
Open Paper 1. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 1 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 120%.
Let’s do the frame layer now:
Element 6 – C/P and leave in the middle of the tag. From here, I grabbed my SELECTION TOOL and created a circle.
(see preview)
Then I added a new raster layer. Opened Paper 15. Copied and pasted into selection. Then I grabbed the magic wand again and went to the frame layer. Click in the middle of element 6.
SELECTIONS – MODIFY – EXPAND 8 PIXELS - DELETE and was left with a background for the frame layer. Keep selected.
New Raster Layer. Move under frame layers. Open Paper 18.
Copy and paste into selection. Keep selected.
If you are using the same tube as me, grab the version you like.
C/P and move it into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT. Duplicate the tube layer. ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to LUMINANCE (L).
(see tag for placements)
(see preview)
Then I added a new raster layer. Opened Paper 15. Copied and pasted into selection. Then I grabbed the magic wand again and went to the frame layer. Click in the middle of element 6.
SELECTIONS – MODIFY – EXPAND 8 PIXELS - DELETE and was left with a background for the frame layer. Keep selected.
New Raster Layer. Move under frame layers. Open Paper 18.
Copy and paste into selection. Keep selected.
If you are using the same tube as me, grab the version you like.
C/P and move it into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT. Duplicate the tube layer. ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to LUMINANCE (L).
(see tag for placements)
Now for some elements:
Element 22 – C/P and move to top left corner. Move this layer under all other layers. Duplicate and mirror.
(see tag for placement)
Element 13 – C/P and re-size 40%. Move to bottom left side in front of all layers.
(see tag for placement)
Element 13 – C/P and re-size 40%. Move to bottom left side in front of all layers.
(see tag for placement)
Element 34 – C/P and re-size 30%. Move bottom right side in front of element 13
(see tag for placement)
Element 30 – C/P and re-size 50%. Move to bottom right side of element 34.
(see tag for placement)
(see tag for placement)
Element 29 – C/P and re-size 50%. Move to bottom right corner of tag. Duplicate and move right just a little.
(see tag for placement)
Element 11 – C/P and re-size 25%. Move to bottom right side of tag.
(see tag for placement)
Element 10 – C/P and re-size 40%. Move to bottom right side of tag.
(see tag for placement)
Element 4 - C/P and re-size 20%. Move to bottom right side of tag.
(see tag for placement)
Element 17 - C/P and re-size 50%. Move to right side of frame. Duplicate and move up some.
(see tag for placement)
Element 21 - C/P and re-size 50%. Move to right side between element 17 and copy of element 17. Make sure copy of element 17 is under this layer.
(see tag for placement)
Element 5 - C/P and re-size 80%. Move to top left corner of tag.
(see tag for placement)
Element 26 - C/P and move to upper left side of tag. Duplicate and mirror and flip.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab the version of tube you want to work with. C/P and re-size 50%. Move to left side of tag.
(see tag for placement)
(see tag for placement)
Element 11 – C/P and re-size 25%. Move to bottom right side of tag.
(see tag for placement)
Element 10 – C/P and re-size 40%. Move to bottom right side of tag.
(see tag for placement)
Element 4 - C/P and re-size 20%. Move to bottom right side of tag.
(see tag for placement)
Element 17 - C/P and re-size 50%. Move to right side of frame. Duplicate and move up some.
(see tag for placement)
Element 21 - C/P and re-size 50%. Move to right side between element 17 and copy of element 17. Make sure copy of element 17 is under this layer.
(see tag for placement)
Element 5 - C/P and re-size 80%. Move to top left corner of tag.
(see tag for placement)
Element 26 - C/P and move to upper left side of tag. Duplicate and mirror and flip.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab the version of tube you want to work with. C/P and re-size 50%. Move to left side of tag.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Subscribe to:
Post Comments
(Atom)
0 comments:
Post a Comment